Fujitsu MPG3XXXAT manual

*4 Normalized attribute value

The current attribute value is the normalized raw attribute data. The value varies between 01h and 64h. The closer the value gets to 01h, the higher the possibility of a failure. The device compares the attribute values with thresholds. When the attribute values are larger than the thresholds, the device is operating normally.

*5 Worst ever normalized

This is the worst attribute value among the attribute values collected to date. This value indicates the state nearest to a failure so far.

*6 Raw attribute value

Raw attributes data is retained.

*7 Off-line data collection status

Values	Description
00h or 80h	Off-line data collection is not started.
01h or 81h	Reserved
02h or 82h	Off-line data collection has been completed without error.
03h or 83h	Reserved
04h or 84h	Off-line data collection has been suspended by an interrupt
	command from the host.
05h or 85h	Off-line data collection has been aborted by an interrupt
	command from the host.
06h or 86h	Off-line data collection has been aborted with a fatal error. (Not
	used)
40h to 7Fh	Vendor unique (Not used)
C0h to FFh
07h to 3Fh	Reserved
87h to BFh

If bit [7] is 1, it indicates that automatic off-line data collection function is enabled.

*8 Self Test execution status byte [16Bh]

Bit 0-3: Self Test remain time.

The values in these bits indicate the remaining percentage (0% - 90%) of Self Test until completion by 0h-9h.

Bit 4-7: Self Test execution status

00h: Self Test has been completed normally. Otherwise Self Test has not performed.

01h: Self Test has been interrupted by host.

02h: Self Test has been interrupted by the soft/hard reset from the host.

C141-E110-02EN 5 - 57