Fujitsu MPG3XXXAT manual Information to be read by Identify Device command 4

Table 5.5 Information to be read by IDENTIFY DEVICE command (4 of 7)

*10	Word 59: Transfer sector count currently set by READ/WRITE MULTIPLE command
	Bit 15-9:	Reserved
	Bit 8:	Multiple sector transfer 1 = Enable
	Bit 7-0:	Transfer sector count currently set by READ/WRITE MULTIPLE without
		interrupt supports 2, 4, 8 and 16 sectors.
*12	Word 63: Multiword DMA transfer mode
	Bit 15-11:	Reserved
	Bit 10:	1 = Multiword DMA mode 2 is selected
		0 = Multiword DMA mode 2 is not selected
	Bit 9:	1 = Multiword DMA mode 1 is selected
		0 = Multiword DMA mode 1 is not selected
	Bit 8:	1 = Multiword DMA mode 0 is selected
		0 = Multiword DMA mode 0 is not selected
	Bit 7-3:	Reserved
	Bit 2:	1 = Multiword DMA mode 2 and below are supported
	Bit 1:	1 = Multiword DMA mode 1 and below are supported
	Bit 0:	1 = Multiword DMA mode 0 is supported
*13	Word 64: Advance PIO transfer mode support status
	Bit 15-8:	Reserved
	Bit 7-0:	Advance PIO transfer mode
	Bit 1 = 1		Mode 4
	Bit 0 = 1		Mode 3
*14	Word 80: Major version number
	Bit 15-6:	Reserved
	Bit 5:	ATA-5	Supported = 1
	Bit 4:	ATA-4	Supported = 1
	Bit 3:	ATA-3	Supported = 1
	Bit 2:	ATA-2	Supported = 1
	Bit 1:	ATA-1	Supported = 1
	Bit 0:	Undefined
*15	Word 82: Support of command sets
	Bit 15:	Reserved
	Bit 14:	NOP command supported = 0
	Bit 13:	Read Buffer command supported = 1
	Bit 12:	Write Buffer command supported = 1
	Bit 11:	Write Verify command supported (Old Spec.) = 0
	Bit 10:	Host Protected Area feature command supported = 1
	Bit 9:	Device Reset command supported = 0
	Bit 8:	SERVICE Interrupt supported = 0
	Bit 7:	Release Interrupt supported = 0
	Bit 6:	Lock Ahead supported = 1
	Bit 5:	Write-cache supported = 1
	Bit 4:	Packet command feature set supported = 0
	Bit 3:	Power Management feature set supported = 1
	Bit 2:	Removable feature set supported = 0
	Bit 1:	Security feature set supported = 1
	Bit 0:	SMART feature set supported = 1

5 - 32 C141-E110-02EN