■fi-5000N Device Alarms

If one of the following messages are shown on fi-5000N Message display, it is likely that fi-5000N has hardware problem. In this case, turn off the fi-5000N power and turn it on again. If the same device alarm occurs, contact the store where you purchased fi-5000N or an authorized FUJITSU scanner service provider.

Message

LED

Buzzer

frequency

 

 

 

 

 

(Nothing is displayed)

Blinks at 1 second

-

 

intervals

 

 

 

 

(Nothing is displayed)

Blinks at 2 seconds

-

 

intervals

 

 

 

 

Memory Error

-

-

Restart the device

 

 

 

 

 

Failure of loading program.

-

-

Restart the device.

 

 

 

 

 

PCI Initial Error.

-

Once

Restart the device.

 

(long)

 

 

 

MACROM Read Error

-

Once

Restart the device

 

(long)

 

 

 

Hardware error of fingerprint sensor.

-

Once

Restart the device.

 

(long)

 

 

 

Failure of fingerprint sensor initialization.

-

Once

Restart the device.

 

(long)

 

 

 

Calibration of fingerprint sensor failed.

-

Twice

Restart the device.

 

 

 

 

 

Network configuration failure.

-

Twice

Restart the device.

 

 

 

 

 

86