3.8Push Mode Automatic Logout Time Settings
This setting applies only to Push mode scanning. After performing a scanning, if no other operations are done after a certain period of time, the current user will be logged out automatically. You can specify this waiting time by following the procedure below.
The default time limit for an automatic logout is 0 second.
1.Open the
The following settings screen appears.
Setup
Register Finger
Change PIN Code
Show Network Config
2. With the [L] key, select "Administrator Setup", and press the [ENT] key.
The screen to enter the Administrator's PIN (personal iden- |
|
tification number) appears. | PIN:_ |
| Cancel:[ESC] |
3. Enter the Administrator PIN (the default setting is "5000"), and press the [ENT] key.
The following screen appears.
Administrator Setup
Configure Network
Pull Mode Authentic
Auto Logout Time
4. With the [L] key, select "Auto logout time", and press the [ENT] key.
The following screen appears.
Auto logout time
0_
5.With the keyboard, input the waiting time before logging out (from 0 to 60 seconds) and press the [ENT] key.
The following screen appears.
Auto logout time setting changed
With this, the automatic log out time setting is done.
The setting will take effect from the next scanning.
3
| 23 | |
|