Setup
Register Finger
Change PIN Code Show Network Config Show Device Name Firmware Version Show Scanner Info Administrator Setup
3.10 Displaying Device Information

3.10 Displaying Device Information

With the procedure below, the following information can be displayed in the Message Display:

•The network setting status

•The network name of fi-5000N

•The firmware version

•The status of the connected scanner

1.Open the fi-5000N’s cover and press the [SET] key.

The following settings screen appears.

Setup

Register Finger

Change PIN Code

Show Network Config

2. With the [L] key, select one of the following items, and press the [ENT] key.

(1) To display the network setting status, select "Show Network Config." (For details about changing the network settings, refer to "3.3 fi-5000N's Settings and Connecting to the Network" (page 14))

(2) To display the network name of fi-5000N, select "Show Device Name".(For details about changing the network name, refer to "5.5 fi-5000N Administrator Settings" (page 57))

(3)To display the firmware version, select "Firmware Version".

(4)To display the status of the connected scanner, select "Show Scanner Info."

The selected information will appear on the Message Display.

When the information extends to many pages, press the [ENT] key to display the next page. If the [ENT] key is pressed at the last page, it will return to the screen on step 1.

3

5000N-fi the Installing

fi-5000N Operator’s Guide

 

25