3.6 Beep Sound Configuration

The beep that sounds each time an operation is done, can be set on or off. (The default setting is "Beep".)

1.Open the fi-5000N’s cover and press the [SET] key.

The following settings screen appears.

Setup

Register Finger

Change PIN Code

Show Network Config

2. With the [L] key, select "Administrator Setup", and press the [ENT] key.

The screen to enter the Administrator's PIN (personal iden-

 

tification number) appears.

PIN:_

 

Cancel:[ESC]

3. Enter the Administrator PIN (the default setting is "5000"), and press the [ENT] key.

The following screen appears.

Administrator Setup

Configure Network

Pull Mode Authentic

Auto Logout Time

4.With the [L] key, select "Beep On/Off", and press the [ENT] key.

The following screen appears.

Beep sound

Beep

Mute

5.To set the beep sound on, select "Beep"; to set it off, select "mute" and then press the [ENT] key.

The following screen appears.

Beep sound setting changed

With this, the beep sound setting is done.

20