5.2
The scanning application to be started when the button on the scanner ([Scan] or [Send To]) is pressed, can be configured from this screen.
Name of Item | Function |
|
|
Button: | Selects the button to be configured from among "Scan", and "Send To 1 - |
| Send To 9". You must set the following "Target", "Argument" and "Start In", |
| otherwise no application will start up. |
|
|
Target: | Specifies the file name of the application to be started. |
|
|
Argument: | Specify according to the specifications of the application to be started. |
| Refer to "5.7 Settings of [Launch Option]" (page 65) when using ScandAll |
| 21. |
|
|
Start In: | Specify according to the specifications of the application to be started. |
| Note that start in folder is specified for creating the image file when using |
| ScandAll 21. |
|
|
5
Software
| 47 | |
|