If the PIN matches, the following screen appears. Confirm the correct finger placement by looking at the sticker inside of the cover. For the details, please refer to "APPENDIX Using User Authentication by Fingerprint."
Press [ENT] key, then the following screen appears and the registration of the fingerprint starts.
Look at the sticker inside of cover for finger placement OK:[ENT]
Registration:
Place your finger
on the sensor
6. Place the finger to register on the fingerprint sensor.
If your fingerprint is correctly captured, a buzzer sounds and at the same time the following screen appears.
Processing...
Remove your finger from the sensor
7. Remove your finger from the fingerprint sensor.
The following screen appears and the fingerprint verifications will be repeated twice.
Fingerprint will
be verified twice. Place your finger on the sensor
8. For verification procedure, place the registered finger on the fingerprint sensor again.
If the first verification is successfully done, the following screen appears.
First Verification is successful
9. Second verification starts.
Starting Second Verification.
Place your finger
on the sensor
72