4. With the [L] key, select "Pull Mode Authentic.", and press the [ENT] key.

The following screen appears.

"Pull" mode

authentication: Authenticate Not authenticate

5.To perform user authentication, select "Authenticate"; if authentication is unneces- sary, select "Not authenticate" and then press the [ENT] key.

The following screen appears.

"Pull" mode authentication setting changed

With this, the "Pull" mode user authentication setting is done.

The setting will take effect from the next scanning.

HINT

In a "pull" mode scanning, if the user authentication is enabled, the following screen will appear when the scanner driver is started up.

Place your finger

on the sensor (For specified user)

HINT

About Pull mode scanning using ScandAll 21

When you start up ScandAll 21, open the TWAIN dialog box, and click the [Scan] button, the next message appears on monitor screen: "Please perform user authentication by fi-5000N before scanning". This means fi-5000N is waiting for fingerprint authentication. Perform the user authentication. As soon as the authentication is completed successfully, the scanning operation will start.

22