3.11 Initialization of fi-5000N

To reset the settings of the fi-5000N to the factory default, follow the procedure below.

ATTENTION

Initialization will delete all uses information, and the settings are reset to default. Prior to performing initialization, back up the user information by referring to "5.4 Managing User Information of fi-5000N" (page 52). Note down the network setting information to restore them.

1.Turn on the power of the fi-5000N.

2.Open the cover and press the [SET] key.

The following settings screen appears.

Setup

Register Finger

Change PIN Code

Show Network Config

3.Press the [ID] and [.] key simultaneously for about 5 seconds.

The following screen appears.

Do you want to initialize the device? YES:[ENT]/NO:[ESC]

4.To reset the settings to the factory default press [ENT].

The following screen appears.

The device has been initialized.

Restart the device.

5. Restart the fi-5000N.

And with this, the initialization is completed. Now configure the fi-5000N settings.

(For details about the fi-5000N settings, refer to "3.3 fi-5000N's Settings and Connecting to the Network" (page 14).)

26