3.Open the cover and press the [SET] key.
The following settings screen appears.
Setup
Register Finger
Change PIN Code
Show Network Config
4. With the [L] key, select "Administrator Setup", and press the [ENT] key.
The screen to enter the Administrator's PIN (personal iden- |
|
tification number) appears. | PIN:_ |
| Cancel:[ESC] |
5.Enter the Administrator PIN (the default setting is "5000"), and press the [ENT] key.
The following screen appears.
Administrator Setup
Configure Network
Pull Mode Authentic
Auto Logout Time
6.Select "Configure Network", and press the [ENT] key.
The following screen appears.
Do you want to use DHCP? Use DHCP
Use Static IP
7.To obtain the IP address automatically from the DHCP (Dynamic Host Configuration Protocol) server, select "Use DHCP" and press the [ENT] key.
To set the IP address manually, select "Use Static IP" and press the [ENT] key.
If "Use DHCP" is selected: It is not necessary to specify the IP address, subnet mask and default gateway. Go to step 11.
If "Use Static IP" is selected: The following network con-
figuration screen appears.
IP Address:
3
| 15 | |
|