Servicing Customer-Replaceable Units 89

Fan Tray Fault LED

Each fan tray contains a Fault LED that is located on the top panel of the server. The
LED is visible when you slide the server partially out of the rack.
The front panel Fan Fault LED, and the front and rear panel Service Required LEDs
are also lit if the system detects a fan tray fault. In addition, the system Overtemp
LED might be lit if a fan fault causes an increase in system operating temperature.
See “Front Panel LEDs” on page5 and “Rear Pane l LEDs” on page8 for more
information about system status LEDs.
Related Information
“Managing Faults” on page11
“Hot-Pluggable and Hot-Swappable Devices” on page75
“Fan Tray Fault LED” on page89
Servicing Power Supplies
This topic includes the following:
“About Power Supplies” on page90
“Remove a Power Supply (Hot-Swap)” on page 90
“Install a Power Supply (Hot-Swap)” on page91
“Remove a Power Supply” on page92
“Install a Power Supply” on page93
“Power Supply Device Identifiers” on page94
“Power Supply LED” on page95
LED Color Notes
Fault Amber This LED is lit when the fan tray is faulty.