96 SPARC Enterprise T5440 Server Service Manual • June 2011
See “Power Supply LED” on page 95 for specific information about power supply
status LEDs.
Related Information
■“Managing Faults” on page11
■“Hot-Pluggable and Hot-Swappable Devices” on page75
■“Front Panel LEDs” on page5
■“Rear Panel LEDs” on page8
Servicing PCIe Cards
This topic includes the following
■“Remove a PCIe Card” on page96
■“Install a PCIe Card” on page97
■“Add a PCIe Card” on page98
■“PCIe Device Identifiers” on page99
■“PCIe Slot Configuration Guidelines” on page 100

▼ Remove a PCIe Card

Before you begin, complete these tasks:
■Read the section, “Safety Information” on page63.
■Power off the server, using one of the methods described in the section, “Powering
Off the System” on page67.
■“Extend the Server to the Maintenance Position” on page70
■“Perform Electrostatic Discharge – Antistatic Prevention Measures” on page73
■“Remove the Top Cover” on page73
Do the following :
1. Identify the PCIe card you want to remove.
2. Open the PCIe card latch.