122 SPARC Enterprise T5440 Server Service Manual • June 2011
Servicing the DVD-ROM Drive
You must remove the front bezel before servicing the DVD-ROM drive.
■“Remove the DVD-ROM Drive” on page 122
■“Install the DVD-ROM Drive” on page 123
Related Information
■“Servicing the Front Bezel” on page119

▼ Remove the DVD-ROM Drive

Before you begin, complete these tasks:
■Read the section, “Safety Information” on page63.
■Power off the server using one of the methods described in the section, “Powering
Off the System” on page67.
■“Extend the Server to the Maintenance Position” on page70
■“Perform Electrostatic Discharge – Antistatic Prevention Measures” on page73
■“Remove the Top Cover” on page73
■“Remove the Front Bezel” on page120
Do the following:
1. Remove the flex cable retainer.
Loosen the captive No. 2 Phillips screw and lift the retainer up and out of the
chassis.
2. Unplug the DVD-ROM drive from the flex cable assembly.
3. Push the DVD-ROM drive forward until it protrudes from the front of the
chassis.