124 SPARC Enterprise T5440 Server Service Manual • June 2011
■“Power On the Server” on page157
Servicing the Service Processor
The service processor module contains the service processor firmware, IDPROM, and
system battery.
■“Remove the Service Processor” on page124
■“Install the Service Processor” on page126
Related Information
■“Servicing the IDPROM” on page127
■“Servicing the Battery” on page129

▼ Remove the Service Processor

Before you begin, complete these tasks:
■Read the section, “Safety Information” on page63.
■Power off the server using one of the methods described in the section, “Powering
Off the System” on page67.
■“Extend the Server to the Maintenance Position” on page70
■“Disconnect Power Cords From the Server” on page68
■“Perform Electrostatic Discharge – Antistatic Prevention Measures” on page73
■“Remove the Top Cover” on page73
Do the following:
1. Ensure that the power cords are disconnected from the server.
2. Loosen the two captive No. 2 Phillips screws securing the service processor to
the motherboard.