128 SPARC Enterprise T5440 Server Service Manual • June 2011
2. Place the IDPROM on an antistatic mat.
▼ Install the IDPROM
Before you begin, complete these tasks:
■Read the section, “Safety Information” on page63.
■Power off the server, using one of the methods described in the section, “Powering
Off the System” on page67.
■“Extend the Server to the Maintenance Position” on page70
■“Disconnect Power Cords From the Server” on page68
■“Perform Electrostatic Discharge – Antistatic Prevention Measures” on page73
■“Remove the Top Cover” on page73
■“Remove the Service Processor” on page124