104 SPARC Enterprise T5440 Server Service Manual • June 2011
▼ Remove a CMP/Memory Module
Before you begin, complete these tasks:
■Read the section, “Safety Information” on page63.
■Power off the server, using one of the methods described in the section, “Powering
Off the System” on page67.
■“Extend the Server to the Maintenance Position” on page70
■“Perform Electrostatic Discharge – Antistatic Prevention Measures” on page73
■“Remove the Top Cover” on page73
Do the following :
1. Identify the module you want to remove.
2. Rotate the ejector levers up and away from the module.
3. Slide the module up and out of the system.
4. Place the module on an antistatic mat.