Servicing Customer-Replaceable Units 107
CMP and Memory Module Device Identifiers
The following table describes device, device identifiers, and supported
configurations for CMP and memory modules. Device identifiers are case-sensitive.
Note – CMP and memory module names in ILOM messages are displayed with the
full FRU name, such as /SYS/MB/CPU0.
Related Information
■“Managing Faults” on page11
■“FB-DIMM Configuration” on page113
■“Performing Node Reconfiguration” on page159
Supported CMP/Memory Module Configurations
These are the supported CMP/memory module configurations, as viewed from the
front of the server.
Device Device Identifier
CMP0 /SYS/MB/CPU0/CMP0
MEM0 /SYS/MB/MEM0/CMP0
CMP1 /SYS/MB/CPU1/CMP1
MEM1 /SYS/MB/MEM1/CMP1
CMP2 /SYS/MB/CPU2/CMP2
MEM2 /SYS/MB/MEM2/CMP2
CMP3 /SYS/MB/CPU3/CMP3
MEM3 /SYS/MB/MEM3/CMP3
Configuration
CMP3
MEM3
CMP1
MEM1
CMP2
MEM2
CMP0
MEM0
One CMP/memory pair X
Two CM P/m emor y pai rs X X
Three CMP/memory pairs X X X