98 SPARC Enterprise T5440 Server Service Manual • June 2011
3. Insert the PCIe card into its slot.
4. Close the PCIe card latch.
Next Steps
■“Install the Top Cover” on page154
■“Slide the Server Into the Rack” on page 155
■“Power On the Server” on page157
▼ Add a PCIe Card
Before you begin, complete these tasks:
■Read the section, “Safety Information” on page63.
■Power off the server, using one of the methods described in the section, “Powering
Off the System” on page67.
■“Disconnect Power Cords From the Server” on page68
■“Extend the Server to the Maintenance Position” on page70
■“Perform Electrostatic Discharge – Antistatic Prevention Measures” on page73
■“Remove the Top Cover” on page73
1. Identify the correct slot for installation.
See “PCIe Device Identifiers” on page99 and “PCIe Slot Configuration
Guidelines” on page100.