Servicing Field-Replaceable Units 145
Related Information
■“Safety Information” on page63
■“Servicing Power Supplies” on page89
■“Servicing the Power Distribution Board” on page130
■“Servicing the Hard Drive Backplane” on page135
■“Servicing the Motherboard” on page139
▼ Remove the Flex Cable Assembly
Before you begin, complete these tasks:
■Read the section, “Safety Information” on page 63.
■Power off the server, using one of the methods described in the section, “Powering
Off the System” on page 67.
■“Extend the Server to the Maintenance Position” on page 70
■“Perform Electrostatic Discharge – Antistatic Prevention Measures” on page73
■“Remove the Top Cover” on page73
Do the following:
1. Unplug the power cords.
2. Remove the flex cable retainer.
Loosen the captive No.2 Phillips screw and lift the retainer up and out of the
chassis.