7Command-LineInterface
7.1.7.2 Ready(Event)
If the CLI detects the READY job status after it is started,t hereturn values of
allupdated componentsappearas f ollows:
Event.0=Ready Event:Ready
SubEvent.0=Count Sub-event:Count
CompCount.0=2 Numberof components
(maybe 0)
NoError.0=0 Numberof errors
Event.1=StartFlash Event:Ready
SubEvent.1=Result Sub-event:Result
ObjTypeName.1=DAC1164P Objecttype (component)
ObjName.1=SCSIController:PCI6.8.1 Relevantobject
Type.1=0
Status.1=5 Status(5) = R EADY
Error.1=0 Returnvalue of the job
ErrorText.1=ERROR[0] faultless
execution
Descriptionof the return
value
Event.2=Ready Descriptionof the error
SubEvent.2=Result
ObjTypeName.2=ST336704LC
ObjName.2=Disk:PCI1.15.1.SCSI0.0.0
Type.2=0
Status.2=5
242 ServerViewUpdate Management