--nopreun --nopostun(only for update installations)
If these options,w hich must always be specified together,are selected,
theuninstallation routinesdo not run when anupdate installation takes
place.Parameters alreadyset in the update agentare retained.
UpdateAgent >= V5.01
Youstart the installation via the installation package SVUpdateAgent_Lx_
V<vers>.scexe,which you will find on the ServerViewSuite D VD 1 under
SVSSoftware- Software - ServerView- Linux - GlobalFlash - Agents -
OnlineFlash.
Youcan install the update agentat t hecommand level using the following
command:
sh SVUpdateAgent_Lx_V<vers>.scexe
Configurationof the Update Agent
Whenyou have executed the command,the parametersare assigned default
valuesin the /opt/SMAW/ SMAWgfa/cfg/LinuxFwuAgent.cfgfile andyou
canchange these to suit your requirements.
FlashUserGroup=<user-group>
Nameof the primary user groupwhich is entered in /etc/passwd for the
user.All users in this groupare authorizedto execute the update pro-
cedure(defaultGFUSER).
If it doesnot yet exist the GFUSER groupwith the user globalflash and
thepassword globalflash is automatically set up duringinstallation.
Thisparameteris evaluatedonlywhen NoAccountCheck = 0.
NoAccountCheck=<n>
n= 0 (password query enabled;default value)
n= 1 (password query disabled)
ServerViewUpdate Management 49
4.1Installation on the managedserver