PS 1 status LED glows green when the first power supply module in the redundant power supply is installed and working correctly. It flashes green if the power supply module fails or one of its power levels goes out of bounds. If the power supply module is not installed, this LED is off.
PS 2 status LED glows green when the second power supply module in the redundant power supply is installed and working correctly. It flashes green if the power supply module fails or one of its power levels goes out of bounds. If the power supply module is not installed, this LED is off.
System reset button is a recessed button that lets you reset the server if it becomes nonresponsive.
Power button turns the server on and off. In an
Outriggers provide support for the castors.
Castors let you roll the server around for ease of service.
CD drive plays data or audio CDs.
Diskette drive writes to and reads from
Power supply alarm speaker reset/System fault LED reset switch disables the power supply alarm speaker, if it’s sounding, or resets the system fault LED, if it’s flashing. Even though the switch resets the speaker, the power supply alarm is not cleared and the appropriate LED continues to flash until the failed power supply module is replaced.
Front panel door covers the front panel controls to prevent unauthorized or accidental access.
Front panel | 3 |