
Error message | Solutions |
|
|
Invalid password | Enter your password again, making sure to |
| enter it correctly. Note that some passwords |
| are |
| If you do not know the password, you may |
| need to reinstall the software you are trying to |
| access. |
| Startup passwords are stored in BIOS. If this |
| password has been set and is unknown, you |
| may be able to reset the password through |
| system board jumper settings. |
|
|
Keyboard clock line failure | Try a working keyboard. |
| Make sure the keyboard is compatible with the |
| system. You may have to change the switch |
| setting to AT. |
|
|
Keyboard controller failure | Try a working keyboard. |
| Make sure the keyboard is compatible with the |
| system. You may have to change the switch |
| setting to AT. |
|
|
Keyboard not detected | |
| page 117 for a possible solution. |
| Turn off the system, then check the keyboard |
| cable. |
|
|
Keyboard stuck key failure | Remove any objects that may be resting on the |
| keyboard, then restart the system. |
| Check for sticky keys. Clean the keyboard if |
| necessary. |
|
|
Memory errors were detected | |
while the system powered up | during start up.” on page 111 for a possible |
| solution. |
|
|
Memory size error | Enter the BIOS Setup utility, then save the |
| memory configuration. |
|
|
Eject the diskette, then press ENTER. | |
| If the diskette is bootable, check it for errors. |
|
|
Not enough memory | Close all programs that are not currently in |
| use. |
|
|
122Troubleshooting