8Install the new control panel board by placing the mounting slots of the control panel board on the tabs on the front of the chassis, then slide the board down until it locks into place. Make sure the front panel cable is out of the way as you install the board.

9Replace the screw you removed in Step 4.

10Plug the control panel cable into the connector on the control panel board.

11Replace the bezel. (See “Replacing the bezel” on page 28.)

12Close the case. (See “Closing the case” on page 27.)

13Reconnect the power cord, the modem cord, and all other peripherals, then turn on the system.

76Replacing and Adding System Components