Installing the outriggers and castors

The tower chassis is shipped with small rubber feet to prevent it from slipping and to minimize vibrations when the chassis is placed on a desktop. However, if you intend to place the chassis on the floor, you may find it easier to maintain the system if you install the castors (included), which let you roll the server out for easier access.

To install the outriggers and castors:

1Gently turn the chassis upside down, resting it on the top panel.

2Align the outriggers and castors with the slots on the bottom panel of the chassis.

3Place the tabs on the outriggers into the corresponding slots on the bottom panel and slide the outriggers toward the ends of the chassis.

4Carefully return the chassis to the upright position.

16System Setup