
Expansion card retention clip
Card guide release tab
8 Pull the card out of the slot.
9 Insert the bottom edge of the expansion card (the keyed edge with the contacts) into the slot on the system board and push in firmly to seat the card.
10 Once the card is securely placed, slide the card guide release tab down again (for full-length expansion cards) and press the expansion card retention clip through the back panel until it clicks into place to secure the card.
Replacing and Adding System Components
7Remove the existing card by pressing gently on the expansion card retention clip, sliding the retention clip back through the back panel and pressing upwards on the card guide release tab (for
Important The card guide release tab is held in place during shipping by a cotter pin. Remove the cotter pin before moving the release tab. You can replace the cotter pin or leave it out.
64