5Pull open the socket latches on each side of the DIMM socket, then lift the DIMM out of the socket. Store the DIMM in an anti-static container.

6Insert the new DIMM into the socket and align the two notches in the DIMM with the two notches in the DIMM socket.

7Gently press the DIMM into the socket until it is firmly seated. Inserting the DIMM automatically locks the socket latches on each end of the DIMM.

8Replace the bezel. (See “Replacing the bezel” on page 28.)

9Close the case. (See “Closing the case” on page 27.)

10Reconnect the power cord, the modem cord, and all other peripherals, then turn on the system.

52Replacing and Adding System Components