Expansion cards
The server has seven PCI expansion slots on the system board, that may be used for a variety of expansion cards. Two of these slots support
Replacing an expansion card
To replace an expansion card:
1Set any jumpers and switches on the replacement card. (See the card instructions.)
2Turn off the system and disconnect the power cord, modem cord (if installed), and all external peripheral devices.
3Observe all safety and static electricity precautions. (See “Preventing static electricity discharge” on page 22.)
4Remove the bezel. (See “Removing the bezel” on page 25.)
5Remove the left side cover panel. (See “Removing the side cover panel” on page 26.)
6Disconnect any cables attached to the card.
Expansion cards | 63 |