
Probable cause | Solution |
The display type is set incorrectly
In the Control Panel window (Start Settings Control Panel),
The displayed characters are garbled.
Probable cause | Solution |
|
|
The video cable is damaged | Make sure the cable and connectors are in |
| good condition (no bent pins or broken wires). |
|
|
The display setup is incorrect | In the Control Panel window (Start Settings |
| Control Panel), |
| check the settings. The correct video type |
| should be selected, along with a supported |
| resolution. Check your monitor and video |
| controller documentation for details. |
|
|
The video is distorted.
Probable cause | Solution |
|
|
The monitor controls are not | Adjust the monitor controls until the text |
properly adjusted | becomes clear. (See your monitor |
| documentation for more information.) |
|
|
The connector or cable is | Make sure the cable and connectors are in |
damaged | good condition (no bent pins or broken wires). |
|
|
The surge protector or UPS is | Disconnect the monitor power cable and |
damaged | connect it directly to the power source. |
|
|
The monitor is too close to a | Move the monitor away from sources of |
source of electrical | electrical interference, such as televisions, |
interference | unshielded speakers, microwave ovens, |
| fluorescent lights, and metal beams or |
| shelves. |
|
|
The monitor needs to be | Turn off the server and monitor for at least a |
degaussed | half hour, then restart the system. |
|
|
Video problems | 119 |