11Place the backplane onto the hot-plug cage bracket, making sure the hooks on the bracket fit into the slots on the backplane.

12When the backplane is securely in place, tighten the two captive thumbscrews.

13Reconnect all cables on the backplane to the correct connectors.

14Replace all hot-plug drives. Be careful to replace them in the same slots that they were in before you removed them.

15Replace the bezel. (See “Replacing the bezel” on page 28.)

16Close the case. (See “Closing the case” on page 27.)

17Reconnect the power cord, the modem cord, and all other peripherals, then turn on the system.

Replacing the SCSI backplane

79