
The text on the display is dim or difficult to read
| Probable Cause | Solution |
|
|
|
| The monitor’s | Adjust the brightness and contrast knobs until |
| brightness and contrast | the text becomes clear. |
| controls are turned |
|
| down. |
|
|
|
|
| Sunlight is glaring off | Position the monitor away from the sun or |
| the display. | window. |
|
|
|
| The monitor may be old. | Replace the monitor. |
|
|
|
The color monitor displays everything in black and white |
| Probable Cause | Solution |
|
|
|
| The system was turned | Make sure that the monitor is turned on, then |
| on before the monitor. | restart the system. |
|
|
|
| The display type is set | From the Control Panel window (Start |
| incorrectly. | Settings Control Panel), |
|
| set the display to the appropriate monitor |
|
| type, then restart the system. |
|
|
|
The displayed characters are garbled |
Probable Cause | Solution |
|
|
The video cable is | Check the connector and cable for bent or |
damaged. | damaged pins. |
|
|
The display setup is | From the Control Panel window (Start |
incorrect. | Settings Control Panel), |
| and check the settings. The correct video type |
| should be selected, along with a supported |
| resolution. Check your monitor and video |
| controller documentation for details. |
|
|
The video card has | Try another video card. |
failed. |
|
|
|
98Troubleshooting