2Open the case by following the instructions on page 17. (See “Preventing static electricity” on page 15.)
3Locate an available slot and remove the slot cover by removing the screw that secures it to the back of the chassis.
4Insert the bottom edge of the expansion card (the keyed edge with the contacts) into the slot on the system board and push in firmly to seat the card.
Screw
5After seating the card firmly, use the screw you removed to secure the card to the rear of the chassis.
6Connect any cables to the card (see card documentation for proper jumper settings and cable orientation).
7Close the case, as described in Chapter 3.
8Reconnect peripherals, the modem cord, and the power cord, then turn on the system.
The system board | 35 |