
6Using a small,
7Press the new battery in the socket with the positive pole up. Be sure you have pressed the battery down far enough for it to contact the base of the socket (it should snap into place).
8Close the case, as described in Chapter 3.
9Reconnect peripherals, the modem cord, and the power cord, then turn on the system.
10If the CMOS data is not correct, change the information in the BIOS Configuration Manager using the data you recorded in Step 2.
Troubleshooting the battery installation
If you have problems after installing the new battery, try each of the items listed below, restarting the computer after each try.
■Turn off the computer and make sure that all exterior cables are attached and secured to the correct connectors.
■Make sure that all power switches are on. If the computer is plugged into a power strip or surge protector, make sure it is turned on also.
■Enter the BIOS Configuration Manager program and compare the settings on the screen with your notes or the system hardware manuals. Correct any discrepancies.
The system board | 37 |