
Hard drive problems
The SCSI drive is not recognized by the system
| Probable Cause | Solution |
|
|
|
| The SCSI bus is not | Make sure that the last device on the SCSI |
| properly terminated. | chain is properly terminated. |
|
|
|
| The drive is configured | Change the device’s SCSI address to one that |
| with a conflicting SCSI | is not currently being used by the system. |
| address. |
|
|
|
|
| The cables are not | Open the system, then check the cable |
| connected correctly. | connections. |
|
|
|
The IDE drive is not recognized by the system |
Probable Cause |
|
| Solution |
|
|
| |
The primary IDE device | Restart your computer, then press F1 to enter | ||
may be configured | the BIOS Setup utility program. From the | ||
incorrectly. |
|
| Advanced IDE Configuration menu, set the IDE |
|
|
| Controller to Both and the Primary IDE Master |
|
|
| to Auto. |
|
|
| |
The drive may not be | Consult the hard drive user’s guide for | ||
configured properly. | instructions on how to configure the drive. | ||
|
|
| |
The drive cables are not | Open the system, then check all cables | ||
connected properly. | connected to the controller card. | ||
|
|
| |
The drive controller is | Open the system, then reseat the drive | ||
not seated properly. | controller. | ||
|
|
|
|
Important |
| Some systems do not have IDE controller cards because | |
| |||
|
| the IDE controller is built into the system board. | |
|
|
|
|
Hard drive problems | 89 |