Hard drives
Removing and replacing the hard drive
The hard drive that is included with your system is mounted in the bottom drive cage in the chassis.
To replace the hard drive:
1Turn off the system and disconnect the power cord and modem cord, if installed.
2Open the case by following the instructions on page 17. (See “Preventing static electricity” on page 15.)
3Locate the
4Remove the power and data cables from the hard drive.
5Grip the plastic mounting rails firmly with thumb and index finger and pull the drive carefully straight out of the drive cage.
6Remove the small, plastic mounting rails from the hard drive.
Hard drives | 49 |