GBC 930-028 manual Operation

6F-DIHHFLRQ60+WOperation\￿￿2SHUDWLRQand Maintenance Manual

The F-60+ Laminator has been designed with safety as a primary consideration. However, you must become thoroughly familiar with the controls, proper operation, proper service procedures, and safety features of the laminator before using or servicing the unit.

GBC Pro-Tech F-60+ Laminator is a powerful machine that is designed to mount, laminate and encapsulate. The forces required to accomplish these tasks can vary from negligible to very large.

In addition, the laminating roll of the F-60+ can reach temperatures of 270 °F (132 °C). At these temperatures there is a danger of a severe burn if the roll is touched during set-up, operation or servicing.

Safety is an important feature of the F-60+ Laminator. It has emergency stop buttons and a photoelectric eye system on the infeed.

The laminator is equipped with four emergency stop buttons located on the top front and back of either side of the laminator. Any of these, if engaged, stops the laminator. To continue operation all emergency stop buttons must be in the up position and you must press the reset button above the fuse panel on the back of the laminator (see Figure 3-2). The laminator is also equipped with a power lockout (see Figure 3-3) which stops power to the machine.

Push either	Twist pressed
button to stop the	button to resume
laminator	operation - the
	button pops up

1		n
/
	4 tur

Figure 3-1: Using the Emergency Stop Buttons

Operation

Reset Button

POWER

Figure 3-2: Resetting the Laminator

Insert

Lock

POWER

Circuit

Breakers

Secured in

"Off" Position

Figure 3-3: Power Lockout

© GBC Pro-Tech 1999 April 3-1