GBC 930-028 manual Xeulfdwlrq, 1844 202 440 or fax +44 0 1844 202

/XEULFDWLRQ	&RQWDFWLQJ7HFKQLFDO6XSSRUW
-60+ Operation and Maintenance Manual	Maintenance and Troubleshooting

Tools required:

•1/8" hex wrench

•High temperature grease or lithium grease

•Grease gun

To lubricate the laminator:

WARNING

Do not lubricate the laminator when it is hot. You

can be burned.

WARNING

Remove and lockout power from the laminator while you are performing this procedure. You could be severely shocked, electrocuted, or get your fingers caught in the drive mechanisms.

1.Remove the drive and control side cabinet covers using the 1/8" hex wrench by removing the seven screws holding each cover in place. Gently rotate the cover around the clutch knob to allow access to the lubrication points.

2.Using the grease gun, lubricate each grease fitting with one squirt of high temperature grease.

3.Lubricate the chain using a soft cloth and automo- tive oil.

4.Replace the cabinet covers, close the safety shields and reapply power to the laminator.

For machine parts and technical service in North America, please call: 1-800-790-7787. Please provide serial number when calling for service. In Europe, please call: +44 (0) 1844 202 440 or fax: +44 (0) 1844 202 441.

For film and application questions in North America, please call 1-800-236-8843. In Europe, please call: +44

(0) 1844 202 440 or fax: +44 (0) 1844 202 441.

© GBC Pro-Tech 1999 April 4-5