GEAppliances.com
Preparing Quality Steak, Easy as 1, 2, 3:
1.Bring steak to room temperature.
NOTE: Always use safe food practiceswhen handling meat.
2.Season both sides to taste and coat with olive oil or similar.
3.Preheat the oven to BAKE at 425°, with the oven rack in center position “C.”
4.Place your griddleon the designatedarea of the cooktop and then preheat the griddle to 400°F.
CAUTION: The griddlewill beVERY HOT!Use oven mitts.
5.Sear steak on each side for 2 minutes or until the desired browning is achieved. NOTE: There will be“smoke”; ensure there is proper ventilation.
6.Insert the meat probe that camewith your range into the center of the steak, making sure that the tip of the probe is in the centerof the steak.
7. Plug the probe into the outlet (locatedon the upper frontside of the oven), slide the rack back into the oven and close the door.
8.Press PROBE on your control, enterthe desired internal temp, and press START.
9.Allow steak to finish cooking in the oven. Therange control will beep and turn off when the steak reaches the desired internal temperature.
NOTES:
■ After searing, your steak could possibly already be at the desired temperature, depending on size, cut and desired doneness.
■For thinner steaks it may not be possible to achieve a Rare or Medium Rare doneness.
By first searing your meat with a very high heat, you are creating a browning reactionknown as the Maillard Reaction. This reaction unlocks the fuller, more intense flavor from the meat, which occurs when cooking meat at a high heat.
13
Instructions Safety
Instructions | Operating |
|
|