If your range is removed for cleaning, servicingor any reason, be sure the anti-tip device is reengaged properly when the range is replaced. Failure to takethis precaution could result in tipping of the rangeand cause injury.

Safety Instructions

Careand cleaning of the range.

Be sure all controls are off and all surfacesWARNINGare coolbefore cleaning any part of the range.

How to Remove Protective Shipping Film and Packaging Tape

Carefuly grasp acorner of the protective shippingfilm with your fingersand slowly peel it from the appliance surface. Do notuse any sharp items to remove thefilm. Remove all of the film before using the appliance

for the first time.

To ensure no damage is done to the finish of the product,the safestway to remove the adhesive from packaging tape on new appliancesis an application of a household liquid dishwashing detergent. Apply with a soft clothand allow to soak.

NOTE: The adhesive mustbe removed from all parts. It cannotbe removed if it is baked on.

Control Knobs

The controlknobs may be removed for easier

The knobs can becleaned ina dishwasher or

cleaning.

they may alsobe washedwith soap andwater.

Makesurethe knobsare inthe OFF positions

Make sure the inside of theknobs are dry

and pull them straight offthe stemsfor

before replacing.

cleaning.

Replace theknobs, in the OFF position to

 

ensure properplacement.

Control Panel

If desired, the touch pads may be deactivated

Clean upsplatterswith adamp cloth.

before cleaning.

You may also usea glass cleaner.

See theControlLockout information in theUsing

Remove heavier soilwith warm, soapy water.

the clock, kitchen timer and control lockout

Do not use abrasives of any kind.

sectionin this manual.

Reactivate the touch pads after cleaning.

 

Painted Surfaces

Painted surfacesincludethe sides of therange

Do not use commercialoven cleaners, cleaning

and the door,top of controlpaneland the

powders,steelwool or harsh abrasiveson any

drawer front. Clean these with soap andwater

paintedsurface.

or a vinegarand watersolution.

 

Stainless Steel Surfaces (on some models)

Troubleshooting Tips Care and Cleaning

Do not use a steel wool pad; it will scratch the surface.

To clean the stainless steelsurface, use warm, sudsy water or a stainless steel cleaner or polish. Always wipe the surface in the direction of the grain. Follow the cleaner instructions for cleaning the stainless steel surface.

To inquire about purchasing stainless steel appliance cleaner or polish or to find the location of a dealer nearest you, please call our toll-free number:

National Parts Center

1.800.626.2002

GEAppliances.com

 

Support

Porcelain Enamel Cooktop (on some models)

Consumer

 

The porcelain enamel finish is sturdy

 

but breakable if misused. This finish is

 

acid-resistant. However, any acidic foods

 

spilled such( as fruit juices, tomato or

 

vinegar) should not be permitted to

 

remainon the finish.

36

If acidsspill on the cooktop while it is hot,

use a dry paper towelor clothto wipe it up

right away. When the surface has cooled, wash with soap and water. Rinse well.

For other spills such as fat spatterings, wash with soap and water or cleansing powders after the surface has cooled.

Rinse well. Polish with a dry cloth.