GE Motor Protection System, LM10 Data Formats for Device Inputs, see below, Communications

DEVICENET OPERATIONS				CHAPTER 5: COMMUNICATIONS
	Data Formats for Device Inputs
	Bit Position	Name	Value
	Bit 4	Reserved	---
	Bit 3	Reserved	---
	Bit 2	Running 1	---
	Bit 1	Warning	---
	Bit 0	Fault	---

Assembly Object, Class Code 4, Instance 54. Use this object for data received by the master from the slave device.

Attribute	Access		Name/Description		Data Type	Value
3	Get		Device inputs (see format/mapping below)		byte	see below
	Data Formats for Device Inputs
Bit Position			Name	Value
Bit 7		Aux Sense 2 unput status		---
Bit 6		Aux Sense 1 unput status		---
Bit 5		Control from Devicenet		---
Bit 4		Reserved		---
Bit 3		Running 2		---
Bit 2		Running 1		---
Bit 1		Reserved		---
Bit 0		Fault		---

Assembly Object, Class Code 4, Instance 100. Use this object for data transmitted from the master to the slave device.

Attribute	Access			Name/Description		Data Type	Value
3	Set		Control (see format below)			byte	see below
	Data Formats for Device Inputs
Bit Position			Name		Value
Bit 7		Reserved			---
Bit 6		Reserved			---
Bit 5		Security to Min*			---
Bit 4		Reserved			---
Bit 3		Stop			---
Bit 2		Fault Reset			---
Bit 1		Run 2			---
Bit 0		Run 1			---

*If the LM10 has been put into Admin mode via the PDU display and this bit is set to '1', the PDU display will continue to appear to be in Config mode but no settings will be able to be changed. The LM10 will now be in 'User' mode.

Assembly Object, Class Code 4, Instance 101:

Attribute	Access	Name/Description	Data Type	Value
3	Get	Fault and status (see format below)	byte	see below

5–50 LM10 MOTOR PROTECTION SYSTEM – INSTRUCTION MANUAL