Front Panel
Display
SAP | SAPSET | VCR | SUN | MON | TUE | WED | THU | FRI | SAT | |
|
|
| ON |
|
| : |
|
|
|
|
|
| SP |
|
|
|
| AM |
|
| |
|
| LP |
|
|
| : |
|
| CH |
|
|
| EP |
|
|
| : |
| PM |
|
|
MONO | STEREO |
| TIMER |
| PROG | OTR | LINE | SIMUL |
| CATV |
Deck Status | Speed |
| Tape | Clock/Tape Counter |
|
|
| Channel | ||
This illustration shows all the indicators on the Front Panel Display. The indicators will not all be displayed at one time.
The Front Panel Display shows the status for one deck at a time. You can choose the deck that is displayed by pressing Deck 1 or Deck 2 from the Remote Control. There must be a tape in the compartment for that deck’s status to display. For your convenience, the
CATV - Indicates that STD CATV, HRC CATV, or IRC CATV has been chosen for Antenna Source.
Channel - Displays the number of the channel being received by the
Clock/Tape Counter - Displays the present time or Tape Counter number. Day of Week - Displays the current day.
Deck Status - Displays the present status of the last deck viewed, such as REC when a recording is in progress. Deck Status is blank if that deck does not contain a tape.
LINE - This indicator reserved for future use.
MONO - Indicates that the Audio Source is set to Mono. ON - Indicates that
PROG - Indicates that a Timer Recording event has been programmed. SAP - Indicates that a Second Audio Program (SAP) signal is being received. SAPSET - Indicates that the Audio Source is set to SAP or SAP + TV.
SIMUL - Indicates that the Audio Source is set to Simulcast. Speed - Displays the present recording or play speed. STEREO - Indicates that a stereo signal is being received. Tape - Indicates that a tape is in one or both of the decks.
TIMER - Indicates that a Timer Recording event is in progress, or a Timer Recording event has been set and your
VCR - Indicates that your
The Front Panel Display is located in the center of your
29
