26
The Channel/Tuner Menu allows you to select the channels you watch
most frequently and save them in Channel Memory. The Channel Up/Down
buttons will then select only those channels you have programmed. Other
channels can still be selected using the Numeric buttons.
Your VCR-2 keeps two separate memories, one for normal antennas (TV),
and one for cable (CATV). This way, if you regularly switch between your
antenna and cable, you do not have to reset your Channel Memory.
To change the setting for Antenna Source:
∂Press Menu. The Main Menu will appear on your TV screen.
∑Press 5 to select Channel/Tuner Menu. The Channel/Tuner Menu will
appear on your TV screen.
∏Use the Up/Down buttons to highlight Antenna Source.
Press Previous or Next to choose TV, STD CATV, IRC CATV or HRC
CATV. Choose the setting that gives you the best picture or call your
cable company for the correct CATV setting. If you do not have a cable
system, choose TV.
πPress Save or Escape to return to the Main Menu.
▲Selecting a different antenna source will also switch to the appropriate
Channel Memory. One memory is for TV, the other for STD CATV, IRC
CATV, and HRC CATV. Any changes made in one memory will not affect
the other. ▲
To automatically program Channel Memory:
①Follow steps ∂ and ∑ above.
≠Use the Up/Down buttons to highlight Auto Program.
③Press Next to begin Auto Program.
The Auto Program feature scans each channel and assigns those with
signals into Channel Memory. The process takes about 60 seconds.
④Press Save or Escape to return to the Main Menu.
▲During Auto Program the TV View will be locked on tuner. Any deck
operations that would change the TV View (pressing Play for example) are
temporarily disabled.
The Auto Program feature will not function while any deck is recording the
tuner. ▲

❶

12
STOP/EJECT
PLAY
REW FWD PAUSE
SOURCE REC
STOP/EJECT
PLAY
REW FWD PAUSE
SOURCE REC
DECK 1 DECK 2
TV
VIEW TUNER AV•IN
12345
67890
CH
POWER
TV/VCR
RESET
SAVE ESCMENU
CTR UP
DOWN
NEXT
PREV
LCV
DSP

❷

❸❹

COPY
TAPE
▲
1: VIDEO MENU
2: AUDIO MENU
3: SET DATE AND TIME
4: TIMER RECORDING
5: CHANNEL/TUNER MENU
WHEN OK PUSH SAVE
MAIN MENU

CHANNEL/TUNER MENU

AUTO PROGRAM

DELETE

CH 02

ANTENNA SOURCE - TV

ADD

ADD ALL

DELETE ALL

WHEN OK PUSH SAVE

On-Screen
Programming
Channel/Tuner Menu