OUT TO TV
IN FROM: ANTENNA/
CABLE
Twin-lead
CH 3
CH 4
VHF UHF
Coaxial
ANTENNA CABLES VCR-2 BACK PANEL
TV BACK PANEL
VCR-2 Cable
(supplied)
or
VIDEO
IN OUT
or
Adapter
To connect your VCR-2 to your TV, follow these four simple steps. More
advanced connection instructions begin on page 32.
①Place your VCR-2 next to your TV and plug the VCR-2 power cord into a
wall outlet.
∑Detach the antenna cable from your TV (it will be either a round coaxial
cable or a flat twin-lead cable). Attach this cable to the In from Antenna/
Cable connection on the back panel of your VCR-2. If your antenna
cable is twin-lead, use the supplied adapter.
∏A cable is supplied with your VCR-2. Connect the coaxial (round) end of
this cable to the Out to TV connection on your VCR-2 back panel.
Connect the other end of the supplied cable to the antenna connection
on the back of your TV.
Depending on the type of antenna connection your TV has, you will
connect either the round coaxial connector or the twin-lead connectors.
If your TV has both types of connections, use the coaxial connection.
You should not connect both.
πSet the CH 3/CH 4 selector, which is located on the back panel of your
VCR-2. It is preset to channel 3. To avoid interference from a local
station you should choose the channel that is not normally used in your
area.
Use the supplied adapter if your an-
tenna cable is twin-lead.
Quick
Connections

5

∏

π

∑

∏