GoVideo GV2020 manual Audio Features Connections, Simulcast, Multichannel TV Sound MTS Stereo

Audio Features

& Connections

The Audio In and Audio Out connections can be used to connect audio equipment to your VCR-2.

Simulcast

This feature allows you to record stereo sound from your stereo amplifier while recording picture from certain TV broadcasts, such as special con- certs, MTV Music Television, HBO, CINEMAX, etc.

¶Connect your stereo amplifier tape output connections to the Audio In connections on your VCR-2 back panel.

¹Turn on your TV, stereo amplifier, and your VCR-2.

③Set the Audio Source to Simulcast. See page 24.

④Select the desired TV channel on the VCR-2. Tune the stereo receiver to the proper frequency to receive the audio transmission.

¥To record a Simulcast, insert a blank tape into either deck, turn on Dolby NR for the appropriate deck if desired (page 24), and press Record.

Multichannel TV Sound (MTS) Stereo

You can enjoy MTS broadcast stereo by connecting your VCR-2 to your stereo amplifier and speakers. MTS will allow you to enjoy full stereo sound when your Audio Source is set to Stereo or TV + SAP.

¶Connect the Audio Out connections on your VCR-2 back panel to the play or auxiliary input connections on your stereo amplifier.

¹Turn on your TV, stereo amplifier, and your VCR-2.

③Set the Audio Source to Stereo or TV + SAP. See page 24.

④Select the appropriate input (AUX or TAPE) on your stereo amplifier.

TO STEREO AMPLIFIER

RECORD OUTPUT

CH 3 CH 4

	LEFT RIGHT LEFT		RIGHT
	AUDIO IN	AUDIO OUT
OUT TO TV
	VIDEO	STILL TRACKING
IN FROM: ANTENNA/
CABLE		DECK 1
IN	OUT		DECK 2

∂

TO STEREO AMPLIFIER PLAY OR AUX INPUT

38

DUAL-DECK VCR BACK PANEL