Graco 3A2495C AEF Fine Finish Pre-Orifice Spray Tips, Orifice Fluid Output, Oz/min l/min

Spray Tip Selection Chart

AEF Fine Finish Pre-Orifice Spray

Tips

Recommended for high finish quality applications at low and medium pressures. AEF tips have a pre-orifice that assists in atomizing sheer thinning materials, including lacquers.

Order desired tip, Part No. AEFxxx, where xxx = 3–digit number from the matrix below.

Orifice	Fluid Output			Maximum Pattern Width at 12 in.				(305 mm)
Size	fl oz/min (l/min)				in.	(mm)
in. (mm)	at 600 psi	at 1000	6-8 (150-	8-10	10-12		12-14	14-16	16-18
	(4.1 MPa,	psi (7.0	200)	(200-250)	(250-300)		(300-350)	(350-400)	(400-450)
	41 bar)	MPa, 70
		bar)			Spray Tip
† 0.010	9.5 (0.28)	12.5	310	410	510		610	710
(0.254)		(0.37)
0.012	12.0	16.0	312	412	512		612	712	812
(0.305)	(0.35)	(0.47)
0.014	16.0	21.0	314	414	514		614	714	814
(0.356)	(0.47)	(0.62)
0.016	20.0	26.5		416	516		616	716
(0.406)	(0.59)	(0.78)

* Tips are tested in water.

Fluid output (Q) at other pressures (P) can be calculated by this formula: Q = (0.041) (QT) where QT = fluid output (fl oz/min) at 600 psi from the above table for the selected orifice size.

† These tip sizes include a 150 mesh filter.

3A2495C 63