Graco 3A2495C important safety instructions Air Valve Repair, See Gun Barrel Installation

Air Valve Repair

1.See Prepare the Gun for Service, page 39.

2.See Gun Barrel Removal, page 43.

3.Remove the screws (13) and trigger (12).

4.Remove the ES On-Off Valve. See ES On-Off Valve Repair, page 50.

5.Remove the spring (2).

6.Push on the front of the air valve shaft to force it out the back of the handle. Inspect the rubber seal (23a*) and replace if damaged.

7.Inspect the u-cup (3). Do not remove the u-cup unless damaged. If removed, install the new one with its lips facing into the gun handle (16). Place the u-cup on the shaft of the air valve to help seat it in the gun handle.

Repair

8.Install the air valve (23) and spring (2) into the gun handle (16).

9.Install the ES On-Off Valve. See ES On-Off Valve Repair, page 50.

10.Install the trigger (12) and screws (13).

11.See Gun Barrel Installation, page 43.

Figure 41 Air Valve

Figure 40 Install U-Cup

3A2495C 51