Grizzly G0634Z manual Inventory, Common Components Qty Jointer/Planer Assembly Not shown

Inventory

The following is a description of the main compo- nents shipped with your machine. Lay the compo- nents out to inventory them.

Note: If you can't find an item on this list, check the mounting location on the machine or examine the packaging materials carefully. Occasionally we pre-install certain components for shipping purposes.

Common Components (Figure 3 & 3)		Qty
A. Jointer/Planer Assembly (Not shown)		........ 1
B.	Push Blocks	2
C.	Cutterhead Guard Assembly	1

D.Hardware and Tools (Not Shown)

	— Wrench 12/14	1
	— Hex Wrench 3mm	1
G0633 ONLY (Figure 4)
E. Knife Setting Jig Hardware
	— Knife Setting Gauge Feet	2
	— Knife Setting Gauge Rod	1
	— E-Clips 9mm	2
F.	Tools (Not Shown)
	— Wrench 8/10mm	1
G0634 ONLY (Figure 5)
G.	Spiral Cutterhead Hardware
	— Indexable Carbide Inserts	5
	— Flat Head Torx Screws M6-1 x 15	10
	—Torx Drivers T20	5
	—T-Handle Wrench 1/4"	1

B

C

Figure 3. Common components.

-14-

E

Figure 4. Knife gauge hardware.

G

Figure 5. Spiral cutterhead hardware.

If any nonproprietary parts are missing (e.g. a nut or a washer), we will gladly replace them; or for the sake of expediency, replacements can be obtained at your local hardware store.

G0633/G0634 Jointer/Planer Combo Machine