Reread Delay Selection

This selection allows you to set a time period that must pass before the scanner can read the same bar code again. Setting a reread delay protects against accidental rereads of the same bar code. Longer delays are effective in minimizing accidental rereads at POS (point of sale) terminals. Use shorter delays in applications where repetitive bar code scanning is required.

Low (175 milliseconds)

Medium (450 milliseconds)

High (1.0 second)

Extra High (2.0 seconds)

Good Read Delay Selection

This selection allows you to set a time period that must pass before the scanner can read another bar code. Some terminals require a slower read rate. By setting a good read delay, you can ensure a good read.

None

Low (500 milliseconds)

Medium (1.0 second)

High (1.5 second)

Laser Voting Selection

When Laser Voting is enabled, the scanner requires three (3) identical, consecutive scans before the bar code data will be accepted and transmitted to the terminal. When this selection is disabled, the bar code data will be transmitted following one (1) valid scan.

Enable

Disable

SCANTEAM 5700 User’s Guide

2–9

Page 33
Image 33
Hand Held Products 5700 manual Reread Delay Selection, Good Read Delay Selection, Laser Voting Selection