Hand Held Products 5700 manual Laser Output only

Laser Output only

5700–X0

(Laser Compatible Bar Image)

Conventional laser data format is provided at the modular connector in the scanner handle.

Interface cables normally supplied with scanner model 5700–X0 are terminated with an 10 pin modular plug (P1) and a 9 pin Type D (Squeeze–to–release) connector (P2) that is compatible with all Welch Allyn terminals. See chart below.

P1 P2

10 Pin Modular Plug		9 Pin Type D Female
P1 connects to the		P2 connects to
scanner handle.			your terminal.
	Pin 1	5		1
	Pin 10	9	View A–A	6
P1	Signal	Function		P2
9	SOS	Start of Scan		1
	Data	Digital Bar Code Data Output
6				2
	Good Read	Turn on Good Read LED or Beeper
5				3
	+5VDC	5 Volt Power Connection	♦
7				9
	Trigger	Trigger Signal to Decoder
8				5
3	Enable	Laser Enable		6
	Ground	Supply Ground
4				7
	Braid	Cord Shield
2				8
		N/C	♦
				4

♦Pins 4 and 9 are populated depending on power supply voltage option.

Note: Some decoders may have +12V on pins 4 or 9. Connect to +5VDC

ONLY!

7–2 SCANTEAM 5700 User’s Guide